15th May 2020, 12:59 AM
(This post was last modified: 15th May 2020, 3:36 PM by TRUC. Edited 1 time in total.)
Had this idea while derping around the LE. It's something that has been done before, but rarely in recent years AFAIK, and never with an open contribution concept like Kwing's race collabs.
So, do you want to participate in this Don't Move Collab ? If so, all you need to do is come up with a cool don't move section of your own that meets the following guidelines. Feel free to be creative, as long as it fits !
1. Maximum area allowed is an empty 20x20 area, delimited by a basic block square (which is 22x22, as you can guess). You can use the border if you wish, as long as it's made of basic blocks only. Don't go out of it !
2. You must be able to enter and exit the area without breaking the don't move. Basically, this means that I can reach your P1 spawn block without moving from somewhere, and the player needs to exit in a similar manner, so I can chain the different sections via arrow blocks outside.
3. Avoid finish blocks, item blocks, move blocks and alien eggs.
4. Do not use major glitches that involve LE boundaries.
5. Only ONE (1) section per JV account ---> submit with a picture and/or level ID in this thread
6. Test your section !
Here's an example of a simple don't move that fits the template, with enter and exit areas marked by waffle blocks; as you can see, the spawn block would normally be on the first arrow, but this is to demonstrate #2.
![[Image: FGAUXB.jpg]](https://snipboard.io/FGAUXB.jpg)
Like I said, by the end of the deadline, I will put all the different sections together with your name, and we'll have our first open source Don't Move Collab. There might be more in the future if the interest is present !
Have fun, you have until June 15th to submit your section
So, do you want to participate in this Don't Move Collab ? If so, all you need to do is come up with a cool don't move section of your own that meets the following guidelines. Feel free to be creative, as long as it fits !
1. Maximum area allowed is an empty 20x20 area, delimited by a basic block square (which is 22x22, as you can guess). You can use the border if you wish, as long as it's made of basic blocks only. Don't go out of it !
2. You must be able to enter and exit the area without breaking the don't move. Basically, this means that I can reach your P1 spawn block without moving from somewhere, and the player needs to exit in a similar manner, so I can chain the different sections via arrow blocks outside.
3. Avoid finish blocks, item blocks, move blocks and alien eggs.
4. Do not use major glitches that involve LE boundaries.
5. Only ONE (1) section per JV account ---> submit with a picture and/or level ID in this thread
6. Test your section !
Here's an example of a simple don't move that fits the template, with enter and exit areas marked by waffle blocks; as you can see, the spawn block would normally be on the first arrow, but this is to demonstrate #2.
Like I said, by the end of the deadline, I will put all the different sections together with your name, and we'll have our first open source Don't Move Collab. There might be more in the future if the interest is present !
Have fun, you have until June 15th to submit your section
If you're reading this, it means I have not made a cool signature yet and you should be proud of yourself.
